Manuale d’istruzioni PM1750 MACCHINA PER LA PASTA
dcg16.it
10
2. Product installation steps (before installation, be sure to turn off the
switch and disconnect the power)
1). Install the mixing alex into the
mixing bowl
The outer hexagon hole of the stirring
shaft is fitted into the inner hexagon
hole of the motor shaft.
If it gets stuck in the assembly, rotate
the stirring shaft slightly to install it
smoothly.
5)Tighten the disc nut clockwise. 6)First, aim the top cover
lid clamping position at the
front notch of the fuselage
barrel, press down, hear a
"click", and install in place.
2)Attach the extruding pipe
to the mixing bowl
3)I
nstall extruding axle. 4)Install the disc and
extruding head
Use methodUse method
09
10
5) Stringere il dado del disco
ruotandolo in senso orario.
6) Per prima cosa, agganciare
la copertura nell’incavo nella
parte anteriore della macchina,
quindi abbassarla no a sentire
un “clic” che indica il corretto
posizionamento.
To Next Page
Loading...