DCG VERI50 - Page 18

dcg16.it
Instruction manualInstruction manual
18
EN
Problem Possible Cause Corrective Action Remarks
The pump fails to
function and provide
cooling.
Damaged pump. Repair or replace the
pump with a pump of the
same model.
Loose pump motor
connection.
Tighten connection.
The pump functions but
does not circulate water,
or the cooling pads
contain too little water
Clogged top water
distribution tray.
Clean the top water
distribution tray.
.
Clogged water supply
hose or pump strainer.
Clean the water hose
or remove the particles
clogged at the pump
strainer.
Water spitting from the
unit
Cooling Pad stay out of
the position..
Place Cooling Pad in the
right position.
Clogged top water
distribution tray.
Clean the top water
distribution tray.
Undesirable odor
The unit is placed in an
area where undesirable
odors are present, or
algae are present in the
water tank.
Clean the water tank and
the cooling pads.
White sediments in the
water tank.
Water has a high content
of salt.
Drain the tank and clean
the cooling pads more
frequently.