DCG VERI50 - Cleaning Water Tank; Filling the Water; Draining Water

dcg16.it
Instruction manualInstruction manual
16
EN
CLEANING, FILLING AND DRAINING
Cleaning cooling pad
Remove the back shutter and then pull
the cooling pad as below arrow.
Cleaning water tank
Pull out water tank, and clean by soft
brush, then push water tank
back into the air cooler completely.
Filling the water
Pull out water tank, ll up water until
the max level, then push water tank
back into the air cooler completely
Draining water
Pull out water tank, remove drain
valve and wait until water tank is
empty, then put drain valve and
push water tank back
Clean the cooling pad with normal
water and wipe the dirt by soft brush.