Dcm MC-HD200 - Page 16

15
Press [#]+[#]+[#] will erase all preset positions
in the memory.
6.Recalling the Preset
Press any of the numeric buttons 0-9directly to
recall stored preset positions and settings.
Note:
No action is executed if a relative preset
position is not stored.
7. Camera Selection
Press the button corresponding to the camera
you want to operate.
8. Camera IR Address Set
[*]+[＃]+[F1]: Address1
[*]+[＃]+[F2]: Address2
[*]+[＃]+[F3]: Address3
[*]+[＃]+[F4]: Address4