15
INSTALLATION
Secure the gas hose and replace the gas compartment hatch cover
Undo the screw and remove the gas hose
retainer from the hatch cover.
Slot the gas hose into the hatch cover cutout.
Screw the retainer back in place. Ensure all
the excess gas hose is pulled through into the
gas compartment.
1
3
BE1 products only:
Remove plug from hatch cover and route
electrical wiring through supplied strain relief
bushing. Connect wiring to grill.
BH1 products only:
Ensure plug is secured to hatch cover.
2
Secure the hatch cover into place.
Replace the drawer. Refer to page 19.
4
5
To Next Page
Loading...