DCS RF151 - Cleaning the Ice Maker (Continued)

20
CARE AND CLEANING INSTRUCTIONS
4
Remove the drain plug at the bottom of the reservoir to drain any remaining water and
then reinstall.
Drain plug in bottom of reservoir
5
Allow the ice to fall from the evaporator, remove and discard slab of ice.
6
When cleaning the interior of this product use a nickel free cleaner and follow the
manufacturer’s instructions for use. Add the recommended amount of concentrated
cleaning solution to the reservoir of the ice maker by pouring the solution on the
evaporator. This will then flow down into the reservoir.
Ice slab Remove ice slab and discard
Grid cutter
Allow ice slab to fall onto grid cutter