DCS WT4911 User Manual

English, Français, Español
Português, Italiano, Nederlands
Svenska, Norsk, Dansk, Česky
Polski, Suomi, 中文
WT4911 / WT8911 v1.0
Installation Instructions, Instructions d’installation, Instrucciones de instalación, Instruções de Instalação,
Istruzioni di installazione, Installatiehandleiding, Installationsguide, Installasjonsinstruksjoner,
Installationsvejledning, Pokyny k instalaci , Instrukcja instalacji, Asennusohjeet, 安装指南
29007530R004
DG009211
NOTE: The siren is listed for UL/ULC Residential Burglary applications and it is intended to annunciate only burglary alarm tones. The
siren will sound a dual frequency sweeping tone for burglary alarms. Carbon Monoxide and Fire signal annunciation use have not been
evaluated by UL/ULC. The LED strobe light is not intended for Hearing Impaired signaling.

DCS WT4911 Specifications

General

Brand	DCS
Model	WT4911
Category	Security System
Language	English

Summary

Siren Installation and Setup

Powering Up and Depassivation

Process to prepare the siren battery and the unit for initial operation.

Enrollment & Configuration

Registering the siren with the panel and setting operational parameters.

Physical Installation & Testing

Guidelines for mounting the siren and verifying its placement and signal strength.

Battery Replacement

Instructions for replacing the siren's battery, requiring trained personnel.

Product and Software Warranty

Hardware Limited Warranty

Warranty terms for defects in materials and workmanship for the physical product.

Software License Agreement (EULA)

Terms and conditions governing the use of DSC software products.

FCC Compliance

Compliance Statement

Statement regarding testing and compliance with FCC regulations for digital devices.

Industry Canada Compliance

IC Compliance Information

Details on Industry Canada certification and compliance with ICES-003.

Brazil Compliance

ANATEL Certification

Information regarding ANATEL certification and operating conditions for the device in Brazil.

Declaration of Conformity

R&TTE Directive Compliance

Statement confirming device compliance with essential requirements of Directive 1999/5/EC.