Step 1.
After the holder is power on, when the mobile phone is
close to the holder, the clamping arms on both sides of
the holder will automatically open, and automatically
close after about two seconds.
Step 2.
When taking out the phone from the holder, touch the
release button on the side of the holder with your finger,
and the clamping arm will open automatically.
√
×
×
1) Do not place your fingers in the horizontal direction of
the clamping arm to avoid getting hurt.
2) Ensure that there is no metal foreign matter between
the wireless charging surface and the phone and no
metal inside or outside the protective case.
Attention:
5.Instruction of Auto Clamping
Arms
The wireless car charger holder supports automatic
induction recognition. Intelligent sensor allows to pick
& place it quickly. Just place your phone , the clamping
arms will close. A gentle touch on quick release button, it
would open automatically.
To Next Page
Loading...