10 Maintenance
Cleaning, storage, and maintenance
How to clean the product
Storage and maintenance
• Before cleaning, separate the traction belt, the neck support, and the sponge pad from the stand.
• Neck support and stand: Clean with a damp cloth, and let it dry in a shaded area.
• Traction belt: Inject air with a pressure of 5 psi or so into the product, and turn the air inlet in a
clockwise direction to close it so as to avoid water from entering the product. Use a smooth
sponge and gently scrub the product while soaked in water mixed with neutral detergent.
After cleaning, use a dry cloth to blot away excess moisture and let it dry in a shaded area.
• Sponge pad: Scrub the product gently while soaked in water mixed with neutral detergent.
After cleaning, use a dry cloth to blot away excess moisture, and let it dry in a shaded area.
• Do not wring out or use the spin cycle of a washing machine.
• Do not use any chemical product other than neutral detergent when cleaning the product.
• Do not apply heat from a dryer when drying the product after cleaning.
• Release air when the product is not in use.
• Keep the product out of reach of children.
• Keep the belt away from sharp objects or high-temperature and ammable materials,
including heaters.
• Store the product in a place where temperature/humidity levels are not high,
and avoid exposure to direct sunlight.
To Next Page
Loading...