23
9
24
22
1
2 x 200mm Rod
1
3 x 4 mm Set Screw
Linkage Stopper
2mm Nut
1
1
4
2.6x 12mm
TP Screw
Rod adjuster
1
2.6x 12mm TP Screw
Fixed Landing Gear
Mount the assembled nose steering landing gear on
fuselage with 2.6x12mm TP screws.
Nose Steering Servo
Must be purchased separately!
3 x 4mm
Linkage Stopper
Mount the linkage stopper on servo plate as shown in
below picture. Then mount servo on wood plate with
the screws supplied with servo.
Attach rod adjuster to the threaded end of the 200mm
rod, and connect to steering. Insert the other end with
the linkage stopper.
Attention: Servo, servo plate and its parts are NOT
included.
Nose Steering
Lock the 3x4mm set screw on linkage stopper in place
until the nose wheel is set at a suitable angle.
To Next Page
Loading...