To Next PageTo Next Page
Need help?Do you have a question about the DE VERE 504 Series and is the answer not in the manual?
General| Brand | DE VERE |
|---|---|
| Model | 504 Series |
| Category | Laboratory Equipment |
| Language | English |
Detailed specifications for the De Vere 504 enlarger models.
Chart for converting between 120V and 240V code numbers.
Information about the voltage converter for the enlarger.
Procedures for receiving and unpacking the enlarger components.
Step-by-step instructions for setting up the enlarger.
Specific instructions for mounting the DVW model to a wall.
Instructions for installing the DVB model on a workbench.
Guidance on installing the Colour 500 Analyser accessory.
Details on wiring and connecting electrical components.
Procedure for attaching and connecting the light source.
Overview of the enlarger's parts and their functions.
Description and operation of the negative masking facility.
Details on the film carrier system and loading procedures.
Information on the Dichromat color head and its operation.
Explanation of the tilt adjustment for negative and lens stages.
How the lift pins operate to position the lightsource.
How to use the handwheels for stage adjustment.
Details on the TRANSTAB control box and its switches.
Guide to using the universal timer for exposures.
Information on the different lens panels and their application.
Description of the enlarger's column and its features.
Overview of available optional accessories for the enlarger.
Instructions for installing and using the drop table accessory.
How to convert the enlarger for copy camera use.
Details on the extension tube for lens panels.
Description of the Varicon B&W condenser system.
Information on converting the Varicon to a pointsource.
Details on the Difcon black and white lightsource.
Information on the Cathomag high power lightsource.
Description of the Varicontrast head for variable contrast papers.
Instructions for using the 70mm roll film drawer.
Details on the pin register carrier for precise alignment.
Routine cleaning and care for the enlarger.
Procedures for replacing worn or faulty components.
How to replace the lamps in the Dichromat lightsource.
Procedure for replacing the illuminations bulb in Dichromats.
Instructions for replacing the lamp in the Varicon lightsource.
Procedure for replacing the Cathomag cold cathode tube.
How to replace drive cables on DVB/DVW models.
How to replace drive cables on DVF/DVF Ext models.
Procedures for fine-tuning enlarger components.
Adjusting the nylon rollers on the head support plate.
How to adjust the tension of the drive cables.
Adjusting the drive chains for the drop table assembly.
Adjusting the tilt mechanisms for the lens and negative stages.
How to adjust the tension on the stage handwheels.
Adjusting the bosses that retain lens panels.
