Dea 220H - Page 21

19
6 PROCEDURES
1 Deleting the Memory (default settings)
Phase
Description
Example
1
Press and hold the programming button of the MINI-RX until the LED on the receiver performs a
blink and the buzzer performs an acoustic warning.
2 After about 1 second by the release of the button, the LED on the receiver emits ve ashes.
3 Press the button of the receiver during the third ash.
4 If cancellation is successful the receiver will emit 3 short ashes and 3 acoustic warnings.
5 End
2 Remote Controls Memory Erasure
Phase
Description
Example
1
Press and hold the programming button of the MINI-RX until the LED on the receiver performs a
blink and the buzzer performs an acoustic warning.
2 After about 1 second by the release of the button, the LED on the receiver emits ve ashes.
3 Press the button of the receiver during the 4th ash.
4 If cancellation is successful the receiver will emit 5 short ashes and 5 acoustic warnings.
5 End