Dea Digipro User Manual

15
3.15 Adding cards groups in ZONE 1
In setting mode:
• Press
followed by (the yellow led blinks), then press followed by , a “BI” will be he-
ard as reminder. Insert a 3-digit number (from 000 to 999) corresponding to the data storage
(from 000 to 999 indicating the cards quantity that can be added. For example:
a) Inserting 005 060, it means that the cards added to the memory start from 005 and they
are 60.
b) Inserting 060 150, it means that the cards added to the memory start from 060 and they
are 150.
that the card was corectly added.
Warning:
set) will be automatically saved.
• Press
to exit the setting mode.
3.16 Modifying the user code of ZONE 1
In setting mode:
• Press
followed by (the yellow led blinks), then press followed by , a “BI” will be
heard as reminder. Insert a 3-digit number (from 000 to 999) corresponding to the data
storage box where you want to add a new password (the password length must be the same
as the admin code).
• Press
to exit the setting mode.

Dea Digipro Specifications

General

Brand	Dea
Model	Digipro
Category	IP Access Controllers
Language	English