GHOST 200
INSTRUCTIONS FOR THE FINAL USER
This guide has been prepared for the fi nal users of the automatism; the installer is required to deliver this gui-
de and illustrate its contents to the person in charge of the system. The latter must then provide similar instruc-
tion to all the other users. These instructions must be carefully conserved and easily available for consultation
when required.
Good preventive maintenance and frequent inspection ensures the long working life of the product. Contact
the installer regularly for routine maintenance and in event of anomaly.
SAFETY RULES
1. Always keep a safe distance from the automatism during operation and never touch any moving part.
2. Prevent children from playing near the automatism.
3. Perform the control and inspection operations prescribed in the maintenance schedule and immediately stop
using the automatism whenever signs of malfunction are noted.
4. Never disassemble parts of the product! All maintenance and repair operations must be performed only by
qualifi ed personnel.
5. The release operation must sometimes be performed in emergencies! All users must be instructed on the use
of the release mechanism and the location of the release keys.
GHOST 200 RELEASE MECHANISM
WARNING Disconnect the power supply from the control panel before releasing the operator. In case you
cannot turn the power off, you will necessarily have to re-lock the motor in the position in which it was
unlocked.
All GHOST 200 models are equipped with a release device which must be operated as follows:
1. Disconnect the power supply;
2. Use the manual release key to unlock the gate (Pic. 6), the
operator is unlocked and the gate can move freely. To lock the
gate, bring the gate on the lever assembly which will lock the
spring device and brings GHOST 200 in working condition.
WARNING: During this operation gate may present uncontrol-
led movement: operate with extra care so to avoid any risk.
6
CLEANING AND INSPECTIONS
The only operation that the user can and must do is to remove branches, leaves, and any other object that
might obstruct the gate’s free movement. Warning! Always disconnect the power supply whenever performing
operations on the gate!
DEA SYSTEM S.p.A. - Via Della Tecnica, 6 - ITALY
36013 PIOVENE ROCCHETTE (VI)
tel. +39 0445 550789 - fax +39 0445 550265
Internet http:\\www.deasystem.com - e-mail: deasystem@deasystem.com
EN
To Next Page
Loading...
