EN-3
2 PRODUCT DESCRIPTION
Models and contents of the package
The name GULLIVER identies a series of electromechanical operators for industrial sliding gates with different features as to motor
and control board power supply voltage, capacity, mechanical adjustment of force and built-in limit switch.
GULLIVER is completed by a set of accessories listed in the “PRODUCT ACCESSORIES” table (page I-6). This operator is composed of
a mechanical gear motor which rotates the driving gear; This gear, coupled to the rack properly installed on the gate, converts the circular
motion of the gear motor into rectilinear motion thus allowing the movement of the gate on its own guide.
Inspect the “Contents of the Package” (Pic. 1) and compare it with your product for useful consultation during assembly.
Transport
GULLIVER is always delivered packed in boxes that provide adequate protection to the product, however, pay attention to all informa-
tion that may be provided on the same box for storage and handling.
3 TECHNICAL DATA
18NET - 18NET/M - 18/IB - 1503E 25RRT - 25RRTF - 25RRT/M - 25/IB
Motor power supply voltage (V) 230 V ~ ±10% (50/60 Hz) 400 V ~ ±10% (50/60 Hz)
Absorbed power (W) 560 1200
Max Thrust (N) 1300 1650
Duty cycle (cycles/hour) 15 (leaf L=12m) 17 (leaf L=14m)
Maximum n° of operations in 24 hour 240 280
Built-in capacitor (µF) 30 -
Operating temperature range (°C) -20 ÷ 50 °C
Motor thermal protection (°C) 140 °C -
Opening speed (m/min) 10 10
Weight of product with package (Kg) 30
Sound pressure emitted (dBA) < 70
Protection degree IPX4
NET230N
Power supply (V) 230 V ~ ±10% (50/60 Hz)
Fuse F2 (A) 5A
Fuse F1 (A) 160mA
230V operators outputs 2 x 600W
Auxiliaries power supply output 24 V ~
(24V_AUX + 24V_ST = max 200mA)
Safety devices power supply output 24V
“Warning” output 230 V ~ max 150W
Electric lock output max 1 art. 110 or 24V
output max 5W congurable
230V Flashing light output 230 V ~ max 40W
24V Flashing light output
24 V
max 100mA (for led ashing light) art. LED24AI or
open gate warning light/courtesy light
Operating temperature range (°C) -20÷50 °C
Receiver frequency 433,92 MHz
Transmitters type of coding HCS x-code - HCS rolling code - Dip-switch
Max remote controllers managed 100
OPERATOR
CONTROL BOARD
To Next Page
Loading...
Need help?
General
