5 EM50G CELLULAR COMMUNICATION Em50 Series
cesses the files in this directory by appending this data to the appro-
priate logger.
Note: DataTrac 3 lists loggers in the New Devices section by the
logger name when it encounters a logger it has not seen before. Se-
lect your Em50G by its name, and choose the Configure button on
the DataTrac toolbar. Set the location information if desired, then
press Ok.
Downloading with Em50G WebViewer
For help on downloading data through the Em50G WebViewer web
application, please refer to the Em50G WebViewer Help Files, lo-
cated under the Help link on the WebViewer website.
Managing Subscriptions
The DataTrac 3 application attempts to download data from each
logger in the Main window. If you want to stop subscribing from a
logger permanently, select the logger in the list and choose “Delete
Subscription” from the File menu.
The Em50G WebViewer also attempts to download data from each
of the Em50Gs you have subscribed to. For help on unsubscribing
from loggers, see the Em50G WebViewer Help Files, located under
the Help link on the WebViewer website.
Sharing Data
The Em50G and Decagon Data Service also make it easy to share
your measurement data with a colleague or collaborator. You con-
trol who has access to specific Em50G data by providing the unique
Device ID and Password pair associated with each logger (found on
the brightly colored card shipped with each Em50G).
Note: You should keep the Em50G Device ID and Password card
in a safe place. Do not leave it inside the Em50G logger case. Only
share the information on the card with people you wish to have access
44
To Next Page
Loading...