Need help?Do you have a question about the Decagon em50 and is the answer not in the manual?
General| Manufacturer | METER Group (formerly Decagon Devices) |
|---|---|
| Measurement Range | Varies by sensor type |
| Accuracy | Varies by sensor type |
| Resolution | Varies by sensor type |
| Communication | USB |
| Power Supply | 5 AA batteries |
| Operating Temperature | -40°C to 60°C |
| Number of sensors | 5 |
| Battery life | 1 year (with typical use) |
| Measurement Channels | 5 |
| Sensor Types | Compatible with sensors |
Introduces the software options: ECH20 Utility, DataTrac 3, and Em50G WebViewer.
Explains how the Em50 records data based on measurement interval and sensor configuration.
Explains how the Em50 stores data, including format, size, and measurement span.
Lists all sensors compatible with the Em50 logger.
Instructions for installing AA alkaline batteries and activating the logger.
Guides on installing ECH20 Utility and DataTrac 3 software from the provided USB drive.
Steps to configure logger parameters like name, date, time, and measurement interval.
Guides on installing sensors and physically mounting the Em50 logger in the field.
Explains ECH20 Utility for basic logger configuration and data download.
Describes DataTrac 3 for organizing, visualizing, and downloading data from loggers.
Details the ECH2O Utility interface, toolbar, and main screen functions.
Covers common operations like configuring loggers, downloading data, and scanning sensors.
Steps for downloading data from the logger when directly connected via ECH2O Utility.
Guides on configuring the Em50G logger, including measurement interval and upload times.
Explains how to test cellular communication quality using ECH20 Utility.
Outlines options for downloading Em50G sensor data, including direct and internet methods.
Explains how to create a network of loggers transmitting data to a DataStation.
Describes establishing a two-way connection for data download and setting changes.
Step-by-step guide to connecting the Em50R using an Rm-1 radio modem.
Guides on setting up and configuring DataStation networks for Em50R loggers.
How to perform a radio communication test to verify connection quality.
How to download data from the DataStation using DataTrac 3.
Instructions on when and how to replace Em50/Em50G logger batteries.
Solutions for issues related to COM ports and serial communication conflicts.
Solutions for problems connecting the logger directly via USB or serial cable.
Solutions for issues related to radio modem and logger connectivity.
Solutions for problems related to data measurement and download.
Solutions for problems where the logger stops measuring or malfunctions.
To Next Page