Decatur Electronics Scout 2

To Next Page

To Previous Page

Scout 2 Controls and Display

Controls

The operation of the Scout 2 is controlled by the three-button key pad and the trigger.

TEST When you press the TEST button, the radar runs a comprehensive self test.

FAST / Power If the radar is o, pressing the FAST/Power button will turn it on. To turn the radar o, press and

hold the Fast/Power button until the powering down message is displayed then release.

If the radar is on, a short press of the Fast/Power button will toggle between Strong and Fast modes.

Decatur Electronics Scout 2 - Page 5