DecExpert IF-1330TCL - User Manual

Service Email
：
service@decexpert.com
1
Electric Fireplace
Model No.:
□ IF-1330TCL □ IF-1340TCL □ IF-1350TCL
 750W/1500W Heat setting

Carbon log &Crystal stone fuel effect
 Adjust timer from 1H to 8H
 5 level of flame brightness

Flame with twelve changeable led colour
 With safety cut-off device
If you need any help, please feel free to contact us at service@decexpert.com
CONSUMER SAFETY INFORMATION
 Read this manual before installing and operating this appliance
 Failure to follow these instructions may result in electric shock, fire property,
or personal injury
 Do not store or use gasoline or other flammable liquids in vicinity of this
appliance.

Summary

Consumer Safety Information

Essential Safety Guidelines

Read manual, follow instructions, avoid flammable liquids to prevent electric shock, fire, or injury.

Important Safety Information

Heater Operation and Clearance

Covers hot surfaces, keeping combustibles at least 3ft away, and safe operation around children.

Electrical Safety and Usage

Discusses cord safety, grounding, ventilation, avoiding flammable liquids, extension cords, and water proximity.

Additional Safety and Usage Rules

Installation and Electrical Precautions

Includes wall mounting, indoor use, handling glass, and checking outlet integrity.

Operational Safety Checks

Advises turning off before unplugging, disconnecting for maintenance, and checking plug tightness.

Parts and Specifications

Included Parts and Hardware

Lists components like fireplace, remote, screws, bracket, log set, and crystals.

Product Dimensions

Provides detailed measurements for different model numbers in a chart format.

Installation and Assembly

Location and Clearance Requirements

Select a suitable location and adhere to minimum clearance distances from combustibles and mantel.

Mantel Finishing Warning

Caution against using non-heat-resistant paint or lacquer on the mantel to prevent discoloration.

Framing Hole Size

Drywall Opening Dimensions

Specifies the required width (W) and height (H) for the fireplace opening in drywall for each model.

Wall Anchor Installation

Fixing Wall Anchors to Fireplace Box

Details on securely attaching the four wall anchors to the fireplace box per model dimensions.

Fireplace Installation Steps

Preparing and Mounting the Fireplace

Instructions for removing glass, moving the unit to the wall, and securing it.

Final Assembly and Media Installation

Guidance on installing media, re-attaching the glass front, and locking the front panel.

Wall Mounted Installation Guide

Location Selection and Preparation

Choose a suitable wall location and prepare the fireplace unit by removing parts.

Mounting the Wall Bracket

Steps for marking and securely attaching the wall bracket, ensuring it's level and hooks face upward.

Attaching Fireplace to Wall Bracket

Hanging the Fireplace Unit

How to lift and hook the fireplace onto the mounted wall bracket using screws.

Stability and Panel Locking

Check the fireplace for stability and secure the front panel to complete the installation.

Logset and Crystal Ember Installation

Ember Installation Procedure

Remove glass, mount fireplace, clean and place logset or crystal embers into the tray.

Power and Operation Modes

Power Connection Requirements

Connect to a 110-120V grounded outlet; do not exceed circuit amperage.

Operating Methods

Fireplace can be operated via touch panel or remote control; functions are identical.

Control Panel and Remote Operations

Button Functions and Indications

Details the operation of Power, Color, Flame, Heater, Temperature, and Timer functions.

Temperature Limiting Control

Explains the automatic safety shut-off for overheating and the reset procedure.

Remote Control and Basic Maintenance

Remote Control Battery Installation

Steps to insert batteries into the remote control, including screw removal and replacement.

Cleaning Safety Precautions

Always turn off and unplug the unit before cleaning or performing maintenance.

Care, Maintenance, and Troubleshooting

Cleaning Metal, Glass, and Vents

Specific instructions for cleaning different parts of the fireplace to prevent damage.

Troubleshooting Common Problems

Solutions for issues like the fireplace turning off, flame not moving, or wiring problems.

Advanced Troubleshooting

Flame Visibility and Glowing Issues

Correcting problems with the flame not being visible or log set/embers not glowing.

Remote Control Functionality

Resolving issues with the remote control not working, such as low batteries or aiming problems.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Safety Information

This document describes the DecExpert Electric Fireplace, available in models IF-1330TCL, IF-1340TCL, and IF-1350TCL. It serves as a comprehensive guide for installation, operation, and maintenance, emphasizing safety information.

Function Description:

The DecExpert Electric Fireplace is designed as a supplemental heat source, providing both warmth and aesthetic flame effects. It can be wall-mounted, recessed, or mantel-installed, offering flexibility in placement. The appliance features a carbon log and crystal stone fuel effect, enhancing its visual appeal. It includes a heating function with two power settings (750W and 1500W) and a safety cut-off device to prevent overheating. The flame effect is highly customizable, offering 5 levels of brightness and twelve changeable LED colors. A timer function allows users to set the fireplace to turn off automatically, with settings ranging from 1 to 8 hours. The device can be operated via a touch panel located on the bottom right side of the glass panel or through a battery-powered remote control, with both methods offering identical functions.

Important Technical Specifications:

• Models: IF-1330TCL, IF-1340TCL, IF-1350TCL
• Heat Settings: 750W / 1500W
• Fuel Effect: Carbon log and crystal stone
• Timer Range: 1 hour to 8 hours
• Flame Brightness: 5 levels
• Flame Color: Twelve changeable LED colors
• Safety Feature: Safety cut-off device
• Power Requirement: 110-120V, 12 Amp grounded outlet
• Temperature Settings: Adjustable from 62°F to 82°F
• Dimensions (Model Specific):
  • IF-1330TCL: A: 30" (76.2cm), B: 17.0" (43.2cm), C: 4.13" (10.5cm), D: 26.2" (66.5cm), E: 16.2" (41.2cm), F: 9.1" (23.2cm), G: 23.7" (60.2cm)
  • IF-1336TCL: A: 36" (91.5cm), B: 17.0" (43.2cm), C: 4.13" (10.5cm), D: 32.2" (81.8cm), E: 16.2" (41.2cm), F: 9.1" (23.2cm), G: 29.7" (60.2cm)
  • IF-1340TCL: A: 40" (101.6cm), B: 17.0" (43.2cm), C: 4.13" (10.5cm), D: 36.2" (91.9cm), E: 16.2" (41.2cm), F: 9.1" (23.2cm), G: 33.7" (85.6cm)
  • IF-1350TCL: A: 50" (127.0cm), B: 17.0" (43.2cm), C: 4.13" (10.5cm), D: 46.2" (117.3cm), E: 16.2" (41.2cm), F: 9.1" (23.2cm), G: 43.7" (111.0cm)
• Framing Hole Size (Model Specific):
  • IF-1330TCL: W: 26.77” (68.0cm), H: 16.54" (42.0cm)
  • IF-1336TCL: W: 32.77” (83.2cm), H: 16.54" (42.0cm)
  • IF-1340TCL: W: 36.77” (93.4cm), H: 16.54" (42.0cm)
  • IF-1350TCL: W: 46.77” (118.8cm), H: 16.54" (42.0cm)
• Minimum Clearance to Combustibles (from glass front):
  • Bottom: 0"
  • Sides: 0"
  • Back: 0"
  • Top: 11.8" (300mm) to mantel / 11.8" (300mm) to ceiling

Usage Features:

• Installation: The fireplace can be installed as a wall-mounted, recessed, or mantel-installed unit. It requires careful preparation, including selecting a suitable dry wall location, opening a precisely sized hole, and securing the unit with wall anchors and screws. The glass panel must be removed during installation and re-installed afterward.
• Fuel Effect Installation: Depending on the purchased model, either a log set or crystal embers are installed. For crystal media, it's recommended to clean them with mild dish soap, rinse, and dry thoroughly before placing them in the bottom tray.
• Operation: The fireplace can be turned ON/OFF, and its functions controlled via the touch panel or remote control.
  • Power Button: Turns the unit ON/OFF, activating/deactivating all functions and flame effects.
  • Color Button (Coal Bed): Changes the color effect of the coal bed. Holding for three seconds adjusts flame brightness.
  • Color Button (Flame): Changes the back flame color effect. Holding for three seconds adjusts flame brightness.
  • Heater Button: Toggles between 750W, 1500W heat settings, and OFF. The fan blows cool air for 30 seconds after turning off the heater to cool down.
  • Temperature Button: Adjusts the desired temperature from 62°F to 82°F.
  • Timer Button: Sets the auto-off timer from 0 to 8 hours.
• Temperature Limiting Control: The heater is equipped with a safety feature that automatically turns OFF if it reaches an unsafe temperature. To reset, unplug the power cord, turn the ON/OFF switch to OFF, wait 5 minutes, inspect vents for blockages, and then plug the power cord back in.

Maintenance Features:

• General Cleaning: Always turn the heater OFF and unplug the power cord before cleaning or performing maintenance.
• Metal Parts: Buff with a soft, slightly dampened cloth using a citrus oil-based product. Avoid brass polish or household cleaners.
• Glass Panel: Clean with a good quality glass cleaner and dry thoroughly with a paper towel or lint-free cloth. Do not use abrasive cleansers, liquid sprays, or anything that could scratch the surface.
• Vents: Use a vacuum or duster to remove dust and lint from the heater and vent areas.
• Exterior: Clean with a slightly damp cloth or duster.
• Electrical and Moving Parts: Fan motors are pre-lubricated and do not require further lubrication. Electrical components are integrated and not user-serviceable.
• Storage: Store the heater in a clean, dry place when not in use.
• Troubleshooting: The manual provides solutions for common issues such as the fireplace not turning on (overheating, loose wiring), flame not moving (loose wiring, defective motor), log set/embers not glowing (loose wiring, ember off mode), and remote control not working (low batteries, incorrect aiming, defective remote/sensor).
• Remote Control Battery Replacement: The remote control uses 2x AAA batteries. Instructions are provided for removing the back cap, replacing batteries, and re-securing the cap. Batteries should be disposed of at a local hazardous material processing center and never in fire.

Safety Information:

The manual stresses several warnings, including:

• Read the entire manual before use to prevent electric shock, fire, or injury.
• Heater surfaces are hot when in use; avoid direct skin contact.
• Keep combustible materials at least 3 feet (0.9m) from the heater's front, sides, and rear.
• Exercise extreme caution when children or invalids are nearby, or when the heater is left unattended.
• Do not operate with a damaged cord, plug, or if the heater malfunctions or is damaged.
• Do not run power cord under carpeting or cover it.
• Connect only to properly grounded outlets; do not use extension cords or power strips.
• Do not insert foreign objects into ventilation or exhaust openings.
• Do not block air intakes or exhaust.
• Do not use in areas with gasoline, paint, or flammable liquids.
• Do not place near a bed.
• Never use in bathrooms, laundry rooms, or where it could contact water.
• Regularly inspect air vents for blockages and clean with a vacuum only.
• Always mount to the wall bracket before use; do not set on the floor.
• Never use a wall mount bracket from another manufacturer.
• Risk of electric shock; do not open the unit as there are no user-serviceable parts inside.
• Always turn off and disconnect from power before assembly, cleaning, or relocation.
• Never leave unattended; unplug when not in use.
• Never use if wet.
• Never plug into old, cracked, or loose outlets. Check cord and plug connections frequently for overheating.
• If the plug or face plate is hot, discontinue use and have an electrician inspect it.
• If a 3-slot receptacle is not available, a properly grounded adapter MUST be used (adapter not included).
• When using paint or lacquer on the mantel, ensure it is heat resistant to prevent discoloration.
• The product includes a glass panel; handle with extreme caution to prevent personal injury or property damage.
• Only a qualified service person should service and repair the appliance.

DecExpert IF-1330TCL Specifications

General

Brand	DecExpert
Model	IF-1330TCL
Category	Indoor Fireplace
Language	English