Decimator MD-HX - Setup; Setup; Load Defaults; Setup; LCD Off Time; Setup; Back to Status Time

MDHXOPERATINGMANUALVERSION1.0
Copyright©2014DecimatorDesignPtyLtd,Sydney,Australia
10
Setup:(HasSUBMENUs)

Load Defaults
Group 1

MainMenu<==
SubMenu
ParameterWindow
WhenhighlightedintheMainMenu,presstheENTERbuttontoenterthissubmenu.
Pressthe<and>buttonstomoveleftorrightrespectivelythroughthe1menusbelowandpressthe
BACKbuttontogobacktotheMainMenuwhenfinished.
ThecurrentvalueforeachSubMenuisshownintheParameterWindow.

1.SETUP/LOADDEFAULTS(Action)
WhenhighlightedintheMenuWindow,presstheENTERbuttontoloadthedefaultsettings.The
devicewillberesettotheMainMenuInputStatus.

2.Control/LCDOFFTIME(Parameter)
ThisistimetakenfortheLCDlighttoturnoffafterthelastbuttonpress.
Whenthesubmenuishighlighted,pressENTERtotogglethroughthefollowingtimes:
1.) 5seconds
2.) 15seconds
3.) 30seconds
4.) 1minute
5.) 5minutes
6.) 10minutes
7.) 30minutes
8.) Never

3.Control/BACK2STATUSTIME(Parameter)
ThisistimebeforethemainmenuisreturnedtoInputStatusafterthelastbuttonpress.
Whenthesubmenuishighlighted,pressENTERtotogglethroughthefollowingtimes:
1.) 5seconds
2.) 15seconds
3.) 30seconds
4.) 1minute
5.) 5minutes
6.) 10minutes
7.) 30minutes
8.) Never

















