Need help?Do you have a question about the Deco X50-Outdoor and is the answer not in the manual?
Download and install the Deco app, then log in with your TP-Link ID.
Connect the Deco, assign a location, and configure internet connection settings.
Set up the Wi-Fi name/password and confirm the Deco network is ready.
Detailed steps and warnings for mounting the Deco unit to a pole.
Solutions for common issues encountered during Deco setup and network connectivity.
General| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
|---|---|
| Weatherproof Rating | IP65 |
| MU-MIMO | Yes |
| Beamforming | Yes |
| Buttons | Reset Button |
| Protocols | IPv4, IPv6 |
| Power Supply | 12 V ⎓ 1.5 A |
| Frequency Band | 2.4 GHz, 5 GHz |
| Maximum Speed | 3000 Mbps |
| Ethernet Ports | 1 x Gigabit Ethernet |
| WiFi Capacity | Supports up to 150 devices |
| Working Mode | Router, Access Point |
| Processor | 1.0 GHz Quad-Core |
| Security | WPA3 |
| Package Contents | Deco X50-Outdoor Unit, Power Adapter, Ethernet Cable |
| Operating Temperature | -30–70 °C (-22–158 °F) |
| WiFi Speeds | 574 Mbps (2.4GHz) + 2402 Mbps (5GHz) |
To Next Page