What to do if the decoflame DENVER F6 Indoor Fireplace shows 'empty fuel tank'?
If the fuel level in the tank of your decoflame Indoor Fireplace is too low or the tank is empty, do not switch off the electronics and fill the fuel tank as described in section 6.
Why is there no flame in my decoflame DENVER F6 Indoor Fireplace?
If your decoflame Indoor Fireplace has no flame, it might be due to a non-working filament or too much draft in the room. Try to reduce the draft around the fireplace by closing any windows or doors. If that does not help, call your point of sale or go to deco-flame.com and please fill in the service-form. Have the serial number ready.
What to do if the decoflame Indoor Fireplace shows 'hot evapo- rator'?
If the built-in temperature sensor has detected too high a temperature inside the housing of your decoflame Indoor Fireplace model, make sure that the fireplace has been installed according to the technical drawing and the installation manual and has sufficient natural ventilation. If the error keeps occurring, go to decoflame.com and please fill in the service-form.
General| Model | DENVER F6 |
|---|---|
| Category | Indoor Fireplace |
| Heating Function | Yes |
| Remote Control | No |
| Timer | No |
| Material | Steel |
| Burner | Manual |
| Flame Effect | Adjustable flame |
| Color Options | Black |
To Next Page