Decon wheel e-move - Component Adjustment; Adjusting Battery Holder and Switch

Angle adjustment of the battery holder
2. Loosen the screws (A, figure 1). Tilt the battery holder to the desired position and retighten the
screws.
Angle adjustment of the switch lever
Loosen the screws (A, figure 2). Then adjust the lever to the desired position and retighten the
screws.
For instructions on how to adjust the backrest, seat, etc. please refer to the wheelchair instruction
manual enclosed with the delivery.
Decon Wheel AB Tel + 46 (0) 345-408 80
Landerydsvägen Fax +46 (0) 345-408 95
314 22 Hyltebruk www.decon.se
Sweden info@decon.se