Decoro Hercules User Manual

FOUNDATION ASSEMBLY INSTRUCTIONS for Twin & Twin XL
easy-to-assemble FOUNDATION
Easy Adjust Instructions
Twin and Twin XL
Step 1.
Take components out of the box
and lay them out on the oor.
Step 2.
Unfold the frame, lay on side and attach
six support braces with preinstalled wing nuts.
Step 3. Tighten the wing nut until secure. Repeat the same
process for all six legs, making sure all wing
nuts are tightly secured.
Step 4. Flip the base over to stand upright.
Step 5. Install the metal guard to prevent the mattress
from slipping o the edge of the frame.
Enjoy your new adjustable frame!

Decoro Hercules Specifications

General

Brand	Decoro
Model	Hercules
Category	Indoor Furnishing
Language	English

Summary

Twin & Twin XL Foundation Assembly

Prepare Components for Assembly

Unpack and lay out all foundation frame components on the floor before starting.

Attach Support Braces

Unfold the frame, attach six support braces using pre-installed wing nuts.

Secure Support Braces

Tighten all six wing nuts securely to ensure the frame is stable.

Position Base Upright

Flip the assembled base over to stand it upright.

Install Mattress Guard

Install the metal guard to prevent the mattress from slipping off the frame edge.

Full, Queen, King & Cal King Foundation Assembly

Prepare Components for Larger Frames

Unpack and lay out all components for the larger frame sizes on the floor.

Attach Support Braces to Frame Pieces

Unfold each frame piece, attach six support braces using pre-installed wing nuts.

Secure Support Braces on Larger Frames

Tighten all six wing nuts securely for each frame piece.

Position and Align Frame Halves

Flip base upright, place halves side-by-side, aligning inside holes.

Connect Lower Frame Halves

Install two screws with spacers on the lower frame to connect both sides.

Connect Upper Frame Halves (Optional)

Install one screw on the upper frame for synchronized lifting, or omit for separate use.

Install Mattress Guards

Install two metal guards to prevent the mattress from slipping off the frame edges.