Dectron DRY-O-TRON DA2 007 User Manual

DECTRON
DA2 Series Dehumidifier Owners Manual
Product Description
DESCRIPTION
4 Dectron, Inc. November 2009
Data subject to change without notice.
Room Air
Supply Air
Room air is drawn into the unit by the blower. Part of the air enters a cooling coil, where its temperature is
decreased below its dew point. Water will condense from the air onto the cooling coil. In some cases, this water
may drip into a collection pan and exit the unit through a pipe (by others). In other cases, the condensed water
may collect on the cooling coil as frost.
The remainder of the air enters a condenser, where the refrigerant gives up its heat to the air.
The resulting streams of warm and cold air are mixed together and the resulting supply air is delivered to the
space as described elsewhere.
If frost builds up on the cooling coil, it will provoke a periodic defrost mode. During this mode, hot refrigerant
enters the cooling coil, causing the frost to melt. The resulting water droplets fall into the collection pan, and flow
out through the condensate pipe (by others).
Return Air
SAMPLE ONLY
Layout may vary.
Return Air
SAMPLES ONLY
Layout may vary.
A minimum length of
supply duct is
required.

Dectron DRY-O-TRON DA2 007 Specifications

General

Brand	Dectron
Model	DRY-O-TRON DA2 007
Category	Dehumidifier
Language	English