DECWARE ZEN TORII MK III MANUAL
POWER CORDS and CONDITIONING
Upgraded power cords can and do make a difference when the overall strength of the
audio chain begins to show a sock power cord as the weak link. We hear nice
improvements with the use of silver/Teflon DHC-1 power cords.
TWEAKS
The biggest thing regarding tweaking the amplifier itself is going to be tubes. Every tube
will sound a bit different. Rolling tubes, in particular the input tube, with your favorite
NOS (New Old Stock) can yield some very synergistic effects. Beyond tubes, a good
power cord and clean power, the only thing left is vibration control. This amp will suffer
from vibration less than most due to the heavy steel it's built from. Things like tube
dampers and high mass stands can further improve focus.
SERVICE and REPAIR
Your amp is covered parts and labor for the lifetime of the original owner. Should it ever
need repair or you just want it checked, contact us or fill out the RA form on our web site
and include it with your amp when you ship. We'll contact you after it has arrived and let
you know what we've found and determine exactly what caused it. So far less than 1%
of Decware amps have required service since they started shipping in 1998.
GETTING THE MOST FROM YOUR ZEN TORII MK III
Your amplifier comes with a lifetime warranty. Probably one of the only amplifiers in
production that has one. Decware is a small enough company to consider these hand
built amplifiers to be like our pets. We like to keep tabs on them and make sure their
healthy and happy at all times. We don't want to see one get stuffed in a closet and go
unused.
If you're not getting the sound you're after or grow tired of your amp we already know
the 26 reasons that could have created this effect and would be pleased to offer some
free consulting.
There are also over 100 articles written on the web site to this effect and active support
forums for you to participate in.
Manufactured by High Fidelity Engineering Co. WWW.DECWARE.COM
To Next Page
Loading...