DeDietrich DIEMATIC 3 User Manual

2
05/04/2013 - 300011070-001-02 DIEMATIC 3
- Removing the EPROM memory:
`Engage the two pincer grips in the two notches provided under
the EPROM memory holder.
`Squeeze the arms of the pincers to remove the EPROM
memory.

In no event pull on the pincers !
- Reassembly:
`Match the EPROM memory plane

with the support plane

and the EPROM guide mark

with the arrow at the
bottom of the support

if it is present.
`Press down the EPROM memory until it clicks home.
3. Resetting the programmes
- Switch back on.
`To reset the factory settings, press the H, %P, STANDARD
keys simultaneously.
4. Manual mode
The boiler temperature can no longer be adjusted by the boiler
thermostat (The boiler thermostat must be set to the AUTO position).
`Set the temperature using the
/

keys while MANU is
displayed.
This position may be selected to set the burner.
3
4
V 0630
1
3
2
A000221

DeDietrich DIEMATIC 3 Specifications

General

Brand	DeDietrich
Model	DIEMATIC 3
Category	Control Panel
Language	English