DeDietrich EASYMATIC User Manual

AD054C
DE DIETRICH THERMIQUE S.A.S. au capital de 21 686 370 • BP 30 • 57, rue de la Gare • F-67580 MERTZWILLER
Tél. :(+33) 03 88 80 27 00 • Fax :(+33) 03 88 80 27 99
www.dedietrich.com • N° IRC : 347 555 559 RCS STRASBOURG
ENGLISH
Regulator
EASYMATIC
MODE
+
-
1
2
3
4
5
6
7
0
2
4
6 810
12
14
16
18 20 22
24
Instructions for use
29/07/02 - 94863314 - 8575-4450
- Press the PROG (heating) key or the PROG
(domestic hot water) key several times to select the
day of the week.
The first time that you press enables grouped pro-
gramming of all days of the week; all the ”day” arrows
flash.
- In the graphic bar, write dark areas (”comfort” mode
or calorifier heating allowed) using or write light
areas (”reduced” mode or calorifier heating not allo-
wed) using , in steps of 1/2 h.
- Use the key to return in steps of 1/2 h.
- Press the MODE key when you have finished pro-
gramming.
Note:
You can replace customized programs by the original
settings (STANDARD), by pressing the and
keys simultaneously for 5 seconds:
• ”comfort” heating: 6 h - 22 h
• ”comfort” domestic hot water (or calorifier heating
allowed): 5 h - 22 h
3. HOURLY PROGRAMMING
STANDARD
MODE
PROG
PROG
1234567
0
2
4
6810
12
14
16
18 20 22
24
8806N020
The ”EASYMATIC” module displays fault codes that
can occur on the boiler.
If this occurs, note the alarm code and call your fitter.
For example:
AALL 5500
You can also refer to the control panel usage and
connection instructions (boiler with Easymatic control
panel).
5. DISPLAY FAULTS
1234567
0
2
4
6810
12
14
16
18 20 22
24
8806N021A
8806N001
EASYMATIC
CONTROL PANEL
Heating is automatically cut off during the summer
when the outside temperature is greater than a ”com-
fort” temperature for 2 hours.
The display remains identical, but the pump is per-
manently off. The symbol is no longer displayed.
Heating is started again when the outside temperatu-
re drops below the ”comfort” temperature for 2 hours.
4. "SUMMER" OPERATION WITH EXTERNAL SENSOR
Subject to technical modifications.

DeDietrich EASYMATIC Specifications

General

Mounting	Wall-mounted
Control Type	Digital
Protection Rating	IP20
Compatibility	De Dietrich boilers
Display	LCD

Summary

Hourly Programming

Hourly Programming Steps

Details on using PROG, PROGR keys, graphic bar for comfort/reduced modes, and MODE key.

Restoring Default Programs

How to restore original settings (STANDARD) by pressing specific keys simultaneously.

Summer Operation with External Sensor

Summer Operation Mode

Heating cut off when outside temp is high for 2 hours; restarts when it drops.

Display Faults

Fault Code Display

EASYMATIC module displays fault codes. Note alarm code and call fitter for issues.

Further Fault Information

Refer to control panel usage and connection instructions for more details.

Setting the Time

Time and Day Setting

How to set time and day using the ball point pen and key, with minute/hour/day options.

Time Setting Speed Adjustment

Long press on keys increases scrolling speed; short presses for fine setting.

Heating and Domestic Hot Water Set Temperatures

Heating Temperature Adjustment

Select "comfort" or "reduced" temperature using the key and adjust the value.

Domestic Hot Water Temperature

Select domestic hot water temperature using the key and adjust the set value.