Deek-Robot DK-C-01 - User Manual

Product Name: Programmable timer relay module
Model: DK-C-01
Working voltage: DC12V (normal operating voltage DC10V-16V)
Source: DC4V ~ 20V (positive trigger common power button, PNP sensors, PLC
signals, etc.)
Output capability: You can control the DC or AC 220v5A within 30v5A within
Quiescent Current: 20mA,
working current: 50mA
Life: more than 10 million times;
Working temperature: -40 ~ 85'C;
Weight: about 26g
Dimensions: 64.2mm * 34.8mm * 18.5mm
Features: anti-reverse voltage input circuit, worry-free wiring. Signal
input optocoupler isolation, anti-interference ability. Set the
parameters of power and permanent memory. Powerful flash MCU online
programming capabilities, according to user needs can contact the
manufacturers to customize the functionality.
Modules and devices are powered wiring diagram:
power supply modules and devices sharing wiring
diagram:
Shenzhen Deek Technology Co., Ltd.

Deek-Robot DK-C-01 Specifications

General

Model	DK-C-01
Category	Control Unit
Processor	ATmega328P
Operating Voltage	5V
Digital I/O Pins	14
Analog Input Pins	6
Flash Memory	32 KB
SRAM	2 KB
Clock Speed	16 MHz
Dimensions	68.6 mm x 53.4 mm

Summary

Product Details and Specifications

Product Name and Specifications

Details the product name, model, working voltage, output capability, current, life, temperature, weight, and dimensions.

Wiring Diagrams

Modules and Devices Wiring Diagram

Illustrates the wiring connections for modules and devices.

Power Supply Modules and Devices Sharing Wiring Diagram

Shows how power supply modules and devices share wiring.

Functional Overview

Product Features

Details key features like button operations for mode selection, time adjustment, and digital display control.

Operational Modes Description

Explains different operating modes (P-1, P-2, P-3) and their trigger behaviors.

Detailed Operating Instructions

Mode P-1 Operation

Step-by-step instructions for setting up and operating mode P-1.

Mode P-2 Operation

Step-by-step instructions for setting up and operating mode P-2.

Mode P-3 Operation

Step-by-step instructions for setting up and operating mode P-3.

Mode P-4 Operation

Step-by-step instructions for setting up and operating mode P-4.