Need help?Do you have a question about the Deepcool MATREXX55 V4 Series and is the answer not in the manual?
General| Type | Mid Tower |
|---|---|
| Material | Steel, Tempered Glass |
| Expansion Slots | 7 |
| Maximum GPU Length | 370mm |
| Maximum PSU Length | 170mm |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Drive Bays | 2 x 3.5", 2 x 2.5" |
| Front I/O Ports | 1 x USB 3.0, 2 x USB 2.0, 1 x Audio, 1 x Mic |
| Cooling Support | Front: 3 x 120mm or 2 x 140mm, Rear: 1 x 120mm |
| Radiator Support | Front: 120/140/240/280/360mm, Rear: 120mm |
| Dimensions | 440 x 210 x 480 mm |
Details dimensions, GPU/PSU/CPU cooler clearance, and radiator/fan compatibility.
Details screws, standoffs, and cable ties included in the accessory kit.
Visual representation of case dimensions (width, height, length).
Diagram showing ATX, Micro-ATX, and ITX motherboard mounting locations.
Step-by-step guide on how to remove the side panel using the rear thumbscrews.
Instructions on how to detach the front panel from the case chassis.
Guidance on installing ATX, Micro-ATX, and ITX motherboards into the case.
Instructions and diagrams for installing a graphics card (GPU).
Procedure for installing 3.5-inch Hard Disk Drives into the HDD cage.
Steps for installing 2.5-inch Solid State Drives onto the case.
Guide on how to install the Power Supply Unit (PSU) into the case.
Identifies and explains the functions of the front panel ports (USB, Audio, Power).
Illustrates the connection of USB 3.0, Audio, Power, and HDD LED connectors.
Diagram showing manual wiring for RGB fans to controllers or headers.
Explains how to connect RGB components for motherboard synchronization.
Guide for connecting fan power cables to motherboard headers.
To Next Page