Deer Fence Access Gate User Manual

Access Gate Instructions
Tools needed: battery powered driver with Phillips bit attachment, US wrenches/socket set, small hammer
and pair of snips to cut through excess tension cable and ties
Gate Hardware Kit Contents:
QTY
ITEM DESCRIPTION
PART
1
Small bundle of 8" 120
lb strength self locking
fence
ties
(attach fence to gate)
1
4
1 3/8 black
steel
gate corners
2
1
16ft black PVC coated braided steel cable
(hinge side top to latch side bottom)
3
2
Sets of access gate hinges (male 1 5/8
support, female 1 3/8 gate)
4
2
1 5/8 band to 1 3/8 end cap assemblies for “L” or “L2”
5
1
Printed instructions
(not pictured)
6
2
Latch assemblies for access gate
7
1
Bag:
20 self tapping screws, 1
turnbuckle, 2 caps for posts +
2
black
wire
clamps
8
Note: Gate schematics are size specific and are included separately as an attachment
1) Unpack gate tubing bundle and gate hardware kit on a clean level surface.
2) Lay out materials and dry fit the tubing material you received into the various fittings according to your
gate schematic. You won’t need parts “M” and “L or L2” (if applicable) right now. Also, save the larger

Deer Fence Access Gate Specifications

General

Brand	Deer Fence
Model	Access Gate
Category	Other
Language	English

Summary

Gate Hardware Kit Contents

Gate Frame Instructions

Assemble Top Spreader Pole

Assemble the top spreader pole (part 'L' or 'L2') using self-tapping screws for gate frame structure.

Prepare Gate Frame Components

Gather gate frame parts 'M', male hinges, and spreader bar. Consider concrete or ground sleeves for posts.

Install Hinge Side Post

Install the hinge side post, attaching male hinges loosely, then setting in concrete or ground sleeve.

Measure and Install Latch Side Post

Measure and install the latch side post using the mounted gate with extended latches for accurate placement.

Attach Top Bar and Braces

Hang the top bar between posts and attach braces for gates 5 1/2ft or less for stability and support.

Attach Fence Material

Unroll and attach fence material to the gate frame using fence ties (part #1) and trim excess.