To Next PageTo Next PageWhat to do if my deerma DEM-DT16C Dehumidifier doesn't work?
If your deerma Dehumidifier isn't working, check these potential causes: * Ensure the power cord is properly connected to the socket. * If the full water indicator is flashing, drain the water tank and ensure it's correctly placed. * If the room temperature is above 38°C or below 5°C, the protection device may be activated, preventing the machine from working.
How to fix no wind issue in deerma DEM-DT16C?
If there is no wind coming from your deerma Dehumidifier, the filter might be blocked. Try cleaning the filter.
Why is my deerma DEM-DT16C making a loud noise?
If your deerma Dehumidifier is making a loud noise during operation, it could be due to the following reasons: * The machine might be tilted. If so, move it to a flat, firm surface. * The filter might be blocked. Try cleaning the filter.
Why dehumidification function cannot be activated on my deerma DEM-DT16C Dehumidifier?
If the dehumidification function on your deerma Dehumidifier cannot be activated, consider these possibilities: * The filter might be blocked. Clean the filter. * The air inlet or outlet could be obstructed. Remove any obstructions.
Identifies the dehumidifier as DEM-DT16C.
Details rated voltage, frequency (220V~50Hz), and input current (1.0A).
Includes machine size, water tank capacity (2.L), and dehumidification rates.
Lists the relevant GB executive standards for compliance.
Uses freezing technology to effectively remove moisture for comfort.
Simple, lightweight, and convenient for easy relocation.
Features automatic defrosting based on ambient temperature ranges.
Allows users to select different dehumidification levels as needed.
Designed with low-noise operation for a quieter user experience.
Utilizes piezoelectric power consumption design for efficiency.
Explains the three-color aperture and double 8 color word screen functionality.
Introduces the control panel and its various button functions.
Allows adjustment of humidity setting values within a specified range (40%-80%).
Controls fan speed, switching between high and low wind settings based on humidity.
Manages the machine's dehumidify/run state and shutdown.
Enables or disables the negative ion function, indicated by an LED light.
Sets scheduled on/off times for the machine, indicated by double 8 display.
Allows switching between dehumidification and drying working modes.
Notifies user when tank is full, stops operation, and requires emptying.
Instructions on how to safely remove and empty the water tank.
Warnings against using harsh detergents; recommends cold or warm water.
Guide for connecting a water pipe to the drain port for continuous drainage.
Wipe the unit body with a soft, slightly damp cloth.
Instructions for removing, vacuuming, or washing the filter.
Steps to correctly insert the filter screen back into its frame and unit.
Includes emptying water, rolling cord, cleaning filter, and storing in a cool, dry place.
Ensures minimum spacing around the dehumidifier for proper operation.
Checks power connection, water tank status, and room temperature limits.
Addresses filter blockages or obstructions in air inlet/outlet.
Troubleshoots filter blockages or improper machine placement (tilting).
This document describes a dehumidifier, outlining its functions, usage, and maintenance procedures.
The dehumidifier operates on the principle of freezing technology to remove excess moisture from the air, ensuring a dry and comfortable indoor environment. It offers powerful dehumidification capabilities, making it effective in various settings. The device is designed with humidity adjustability, allowing users to select different dehumidification levels to suit specific room needs.
A key feature is its low-temperature operation with automatic defrosting. When the room temperature is between 5°C and 12°C, the machine will pause for defrosting every 30 minutes. If the room temperature is between 12°C and 20°C, defrosting occurs every 45 minutes. This intelligent design ensures efficient operation even in cooler conditions.
The dehumidifier also includes a continuous drainage option. By connecting a 10mm inner diameter water pipe to the drain port on the back of the product, and routing it through the water tank gap, water can be continuously drained from the machine, eliminating the need for frequent manual emptying of the water tank.
The dehumidifier is designed for ease of use with several user-friendly features. It has a cleverly portable design, being simple and lightweight, which makes it convenient to move around as needed.
The display features a three-color aperture (red, blue, purple) and a "Double 8" word screen. Upon powering on, the aperture lights up. The color indicates ambient humidity or temperature: red for ambient humidity above 70, purple for ambient temperature below 50, and blue for ambient humidity between 50 and 70.
The device is controlled via several buttons: "Settings," "Fan Speed," "Negative Ion," "Timing," "Mode," and "Power."
Upon initial power-on, the machine enters standby mode after a single buzzer beep. The ambient humidity is displayed for 3 seconds, then the display turns off. Pressing the "Power" button activates the dehumidifier. For the first 20 seconds, the indoor temperature is displayed, followed by the ambient humidity for another 20 seconds. Subsequently, the real-time temperature and humidity alternate every 20 seconds. Pressing the "Power" button during operation will shut down the machine. The default operating mode is dehumidification.
The "Fan Speed" button allows users to switch between high and low fan speeds, with corresponding indicator lights illuminating. In drying mode, the fan speed adjusts automatically: high wind when humidity is above 55%, low wind when humidity is below 50%, and either high or low wind between 50-55%.
The "Settings" button is used to adjust the humidity setting value. This is effective in dehumidification mode, with a default setting of 40% humidity. The adjustable range is 40%-80%, with 5% intervals. When setting the humidity, the "Double 8" display flashes. After 5 seconds of inactivity, it returns to the normal display. When the ambient humidity drops to 2% below the set value, the compressor stops, but the fan continues to operate. If the ambient humidity rises to 2% above the set value, the compressor restarts after a three-minute protection time. If the compressor has been off for more than 3 minutes and the current humidity remains below the set value, the fan will automatically turn off. In drying mode, humidity cannot be set, defaulting to 30%.
The "Timing" button enables scheduling operations. In the shutdown state, pressing "Timing" displays the timing duration (01-24 hours), allowing users to set a scheduled power-on time. In the power-on state, pressing "Timing" displays the timing duration (01-24 hours), allowing users to set a scheduled shutdown time. After setting, the display returns to normal. The timer function is automatically canceled if the machine is turned on/off manually or if the water tank becomes full.
The "Negative Ion" button controls the negative ion function, with an indicator light showing when it is active.
The "Mode" button allows selection between two working modes: dehumidification and drying mode.
The device also incorporates a "Quiet Operation" design for low-noise performance and an "Energy-Saving" design based on piezoelectric power consumption.
When the water tank is full, the "water full" indicator illuminates, and the buzzer beeps 15 times to alert the user, after which the machine automatically stops. The water tank must be emptied for the machine to resume operation.
To empty the water tank, hold both sides of the tank and pull it out, then discard the water.
Several safety warnings are provided:
Regular maintenance ensures the dehumidifier's optimal performance and longevity.
The body of the dehumidifier should be wiped with a soft, slightly damp cloth.
Insert the filter screen into the filter screen frame. Then, align the filter screen frame with the card slot on the product's rear shell and install it firmly in place.
When storing the product for an extended period, follow these steps:
When the dehumidifier is operating, ensure a minimum clearance of 20cm around the device to allow for proper airflow and efficient operation.
General| Model | DEM-DT16C |
|---|---|
| Type | Dehumidifier |
| Water Tank Capacity | 2L |
| Rated Voltage | 220V |
| Rated Frequency | 50Hz |
| Operating Temperature Range | 5-35°C |
| Power Supply | AC |
| Dehumidification Capacity | 16L/day (30°C, 80% RH) |
| Operating Humidity Range | 30-80% RH |
