Vacuum cleaner motor does not work.
Troubleshooting: Check whether the plug is securely plugged into
the outlet or the power is on.
The machine stopped working suddenly
Troubleshooting: Turn o the power switch, unplug the power
plug, and after the vacuum cleaner has been cooled for 30
minutes, clean the garbage in the dust panel frame and reuse the
machine.
If the problem persists, please contact our special maintenance
department for maintenance,
Daily maintenance
Open the dust panel frame and take out the strainer, wash the
strainer with water and let it dry naturally.
Precautions:
1. Clean the strainer at least once a month, When there is
obvious accumulation on the strainer, clean it immediately,
After washing, dry the strainer before use.
2. Operate the vacuum cleaner with the strainer installed.
3. Before using the vacuum cleaner again, be sure to check
whether the strainer is installed or damaged.
To Previous Page
Loading...
