Sterilization
In order to sterilize the device, unscrew
the holder and place it inside of an
autoclave with an ultrasonic bath or oven.
Do not store the holder in a dry oven
at temperatures higher than 100 ° Celsius
(73.15 ° Kelvin, 212 ° Fahrenheit): this will
lead to the change of colour.
Use coon pads or disposable paper towels
for this. Submerging the entire device in alcohol
or any other liquid will damage the unit and its
motor. Only the twist-o holder can be sterilized.
Do not spray or pour disinfectants
onto the device, to avoid leakage
on the motor of the device.
!
Sterilizing the entire apparatus
in an autoclave, ultrasonic bath or dry oven
will damage and malfunction its motor.
!
Holder
To Next Page
Loading...