8
Connecting Your Loudspeakers
FIGURE 3 – Wiring and Polarity
STRIP 1/4" (6MM) WIRE
(SPEAKER) (HEIGHT)
1. IDENTIFY MARKINGS ON WIRE AND ASSIGN +/–
2. APPLY BANANA PLUGS OR SPADES AT THIS POINT IF APPLICABLE
1. UNSCREW BOTTOM SET OF BINDING POST
AND CONNECT WIRE
2. TIGHTEN UNTIL SECURE
ENSURE THAT THE SPEAKER IS ALWAYS
CONNECTED TO THE RECEIVER OR AMPLIFIER +
TO + AND – TO –
To Next Page
Loading...
