Definitive Technology Mythos ST User Manual

a sonic point of view. Speakers may be angled in toward the listening position
or left parallel
with each other. Angling the speakers in (pointed directly at the
listener) will result in a somewhat brighter, clearer sound with a sharPer focus
and a more solid central image (generally, we recommend this), while leaving
the speakers parallel with each other will result in a less bright, warmer sound.
Positioning Mythos ST as Rear/Side Surrounds
When used as rear or side surround speakers, Mythos ST may be located on
the side or behind the listeners. When used on the sides, take care never to locate
the speakers forward of the listeners. If the speakers are placed on the rear wall,
it is suggested that they be positioned fairly wide apart ifpossible. (For instance,
if
there is a couch in the center of the rear wall on which the listeners will sit,
try to position the speakers wider apart than the couch.)
"Spiking" Your Loudspeakers
An optional "spiking" kit has been provided should you desire to "spike" your
loudspeakers. "Spiking" your loudspeakers will provide much greater stability
when placing your loudspeakers on carpeting. It will also, according to many
experts, result in an overall improvement in sonic performance. Care should be
taken when using spikes as they may cause damage to wooden or other floors
which are susceptible to being scratched. Definitive Technology is specifically not
responsible for damage which may result from the use of spikes.
The spike kit contains five spikes. To mstall, unscrew the non-marking tips
from the centers of the five leveling feet and screw the five spikes in their places.
Then, with the help of another person, lift the speaker upright and lower it to its
exact desired position on the floor. You must lower the speaker to the exact
position
you want because once the spikes are in place you cannot move the
speakers sideways on the rug or floor - this may damage the floor or the speakers.
Next, adjust the spikes so the speaker sits solidly on all five spikes (and does
not rock.)
Speaker Break-In
Your Mythos STs should sound good right out of the box; however, an extended
break-in period of 40-60 hours or more of normal playing is required to reach full
performance capability. Break-in allows the suspensions to work in and results in
fuller bass, a more open "blossoming" midrange and smoother high frequency
reproduction.
Connecting Your Loudspeakers
Your Mythos STs have a set of speaker level (high level) 5-way binding posts
and in addition, each speaker has an LFE input. This input can be used with Dolby
Digital* and DTS* 5.1 (6.1, 7.1) decoders to separately feed the discrete "Low

Definitive Technology Mythos ST Specifications

General

Brand	Definitive Technology
Model	Mythos ST
Category	Speakers
Language	English