What to do if my Definitive Technology Speaker System has weak bass or diffuse stereo image?
A weak bass or diffuse stereo image in your Definitive Technology Speaker System could be caused by reversed polarity at the speaker wire or interconnects. Make sure the wiring is connected to the positive and negative terminals at each connection point. Also, ensure the interconnects are connected to their respective channels.
How to troubleshoot no sound on one channel of my Definitive Technology Speaker System?
If you're experiencing no sound on one channel of your Definitive Technology Speaker System, it could be due to a faulty connection or a problem with the amplified channel in the receiver. First, check the speaker wires and interconnects to ensure they are properly connected. To isolate the problem, try switching channels or connecting a working speaker to see if the issue persists.
Why does my Definitive Technology Mythos XTR hum?
A hum in your Definitive Technology Speaker System can often be attributed to a ground loop issue with your components or interference from another source. Try plugging the receiver into a different outlet. You can also isolate the source by turning off other electrical devices in the room, such as lights, to see if the hum disappears.
General| Brand | Definitive Technology |
|---|---|
| Model | Mythos XTR Series |
| Category | Speaker System |
| Language | English |
To Next Page