Service
Service and warranty work on your Definitive loudspeakers will
normally be performed by your local Definitive Technology dealer.
If,
however, you wish to return the speaker to us, please contact us first,
describing the problem and requesting authorization as well as the loca-
tion
of
the nearest factory service center. Please note
that
the
address
given in this booklet is the address
of
our
offices only.
Under
no
circumstances should loudspeakers
be
shipped to
our
offices
or
returned
without contacting us first
and
obtaining
return
authorization.
Definitive Technology Offices
11433 Cronridge Drive, Suite K
Owings Mills, Maryland 21117
Phone: 410-363-7148
ProSub Specifications
ProSub
1000
Outer
Dimensions:
Frequency
Response:
Driver
Complement:
Amplifier:
Speaker
Level High-Pass Filter:
High-Level Low-Pass Filter:
Fuse
Size:
ProSub
800
Outer
Dimensions:
Frequency
Response:
Driver
Complement:
Amplifier:
Speaker
Level High-Pass Filter:
High-Level Low-Pass Filter:
Fuse
Size:
Specifications subject to change
12" W X 17.9" D X 14.4" H
18
Hz-1S0
Hz
One 10" woofer with polymer cone
coupled to one 10" infrasonic radiator
300-Watts RMS
6 db/octave (80 Hz)
24 db/octave continuously variable
(40 Hz - 150 Hz) plus unfiltered LFE
direct-coupled input
3.2 amp 250 volt slow-blow Littlefuse
313 type for the 110 volt version, and
2 amp 250 volt slow-blow BEL 5ET
type for the 240 volt version.
10.3" W
X 15.8" D x 12.9" H
20
Hz-150
Hz
One 8
il
woofer with polymer cone
coupled to one
8"
infrasonic radiator
300-Watts RMS
6 db/octave (80 Hz)
24 db/octave continuously variable
(40 Hz
-150
Hz) plus unfiltered LFE
direct-coupled input
3.2 amp 250 volt slow-blow Littlefuse
313 type for the 110 volt version, and
2 amp 250 volt slow-blow BEL SET
type for the 240 volt version.
To Next Page
Loading...
Need help?
General
