To Next PageTo Next Page
Need help?Do you have a question about the Definitive Technology UIW RSS II and is the answer not in the manual?
General| Type | In-Wall / In-Ceiling Speaker |
|---|---|
| Sensitivity | 92 dB |
| Impedance | 8 ohms |
| Tweeter | 1" |
| Drivers | 2 x 5.25" BDSS Bass/Midrange Drivers, 2 x 1" Pure Aluminum Dome Tweeters |
| Woofer | 2 x 5.25" |
Details key features like drivers, radiators, tweeters, enclosure, moisture resistance, and paintability.
Explains how the speakers are voiced and integrated for optimal performance.
Instructs users to check for damage and report it immediately to the dealer or delivery company.
Outlines the speaker's use in home theater systems as surround or main speakers.
Offers advice on speaker placement relative to the listening position for surround sound.
Provides instructions and tips for painting the speaker grille and frame for best results.
Emphasizes adherence to building codes and recommends professional installers.
States the speaker's versatility for both wall and ceiling installations.
Details the need for framing or shimming for in-ceiling installations.
Guides on selecting installation locations, avoiding obstructions and checking clearances.
Specifies required wall clearance for in-wall mounting and handling proximity to studs.
Details mounting requirements against joists and clearance for lock arms in ceiling installations.
States the required 1-inch clearance around the cutout on the mounting surface for the speaker bezel.
Warns about potential joist modification and stresses professional installation for code compliance.
Advises planning speaker wire routing within the ceiling before starting installation.
Briefly covers mounting options and the importance of professional installers and building codes.
Provides template cutout size and minimum cavity dimensions for in-wall mounting.
Lists the minimum cavity dimensions and cutout requirements for in-ceiling installations.
Explains hole placement and clearance requirements for different in-wall and in-ceiling mounting scenarios.
Details hole placement and framing for in-ceiling mounting at 90 degrees to joists.
Mentions the inclusion of 5 short and 2 long gasket strips in the accessory pack.
Describes the specific application of 3 short gaskets on the wooden enclosure for shallow cavities.
Explains how to apply short and long gaskets to enclosure sides that meet framing material.
Guides on connecting speaker wires to the terminals, emphasizing correct polarity (red to red, black to black).
Details connecting speaker wires to the amplifier, ensuring correct polarity for proper phase.
Explains how to secure the speaker in in-wall and in-ceiling installations using lock arms and screws.
Clarifies lock arm function in ceiling mounts, stressing they are for tightening, not primary support.
Specifies minimum cavity dimensions and lock arm clearance for in-wall mounting with 16" stud spacing.
Details minimum cavity dimensions for in-wall mounting near studs, with 3-sided lock arm clearance.
Specifies minimum cavity dimensions and lock arm clearance for in-ceiling mounting inline with joists.
Details minimum cavity dimensions and lock arm clearance for centered in-ceiling mounting.
Details hole placement and framing for in-ceiling mounting at 90 degrees to joists.
Lists key specifications including dimensions, amplification, frequency response, impedance, and driver complement.
Suggests checking interconnections, power cords, and amplifier protection circuits for issues.
Provides contact information for technical support staff at Definitive Technology.
Outlines procedures for service, warranty work, and returning speakers, emphasizing prior authorization.
Details the 5-year warranty for drivers/cabinets and 3-year for electronics from original purchase date.
Lists damages and conditions not covered by the warranty, such as accident, misuse, or unauthorized repair.
Explains limitations on implied warranties and states the specific legal rights granted to the owner.
