EasyManuals Logo

Definitive Technology UIW RSS III User Manual

Definitive Technology UIW RSS III
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
UIW RSS III Applications
The UIW RSS III is designed to be mounted in ceilings or in walls as a rear
or side surround speaker in stealth home theater systems of the highest quali-
ty. In addition, they can be used as a front left, right or center main speaker in
a home theater or as a left or right stereo speaker.
UIW RSS III Positioning
For best results, we recommend that you use Definitive speakers in
combination with your RSS IIIs for the best overall sonic performance.
Definitive’s UIW RSS III Loudspeakers are designed to be mounted in walls
or ceilings with excellent results. Because of their wide dispersion character-
istics and other aspects of their superb sonic performance, mounting position
in your room is very flexible. Due to the different requirements of the wide
variety of room shapes and sizes, we recommend that you consult with the
custom installation specialist at your Definitive Technology dealer regarding
your own particular needs.
As a general guide when using the RSS III as a surround speaker:
Try not to locate the RSS IIIs forward of the main listening position.
If ceiling-mounting these speakers directly on either side of the main
listening position, the speakers should be oriented so that one set of drivers
shoots at the listening position and the other set shoots away from the
listening position.
If ceiling-mounting the speakers directly behind the main listening posi-
tion, orient the speakers so that one set of drivers shoots towards the listen-
ing position and the other set shoots back away from the listening position.
Your Complete Definitive Home Theater
The UIW RSS III Loudspeakers are easily paintable and are shipped with
plastic paint masks (which should be retained even if you initially decide not
to paint the speakers). The grille and frame must be painted separately, and
for best results, prior to installation.
For the grille, spray painting is the recommended method. Follow the paint
manufacturers directions for ventilation and correct spraying procedure. Be
very careful not to clog the speaker grille with too heavy a coat of paint as
this will impair system sonic performance.
Painting Your UIW RSS III Loudspeakers

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Definitive Technology UIW RSS III and is the answer not in the manual?

Definitive Technology UIW RSS III Specifications

General IconGeneral
BrandDefinitive Technology
ModelUIW RSS III
CategorySpeakers
LanguageEnglish

Related product manuals