Do you have a question about the Defort DMM-600N and is the answer not in the manual?
Explains icons found on the digital multimeter device.
Details the multimeter's technical specifications and operating parameters.
Essential general safety precautions for using the multimeter.
Outlines specific safety rules for operating the multimeter.
Instructions and precautions before initial use of the multimeter.
Details the multimeter's display, function switch, and connection ports.
Procedures for measuring DC and AC voltages.
Procedures for measuring DC and AC currents.
Instructions for measuring electrical resistance.
Steps for measuring the conducting-state voltage drop of diodes.
Guide to measuring the hFE value of transistors.
Detailed steps for measuring alternating current using the multimeter.
Safety instructions and procedures for servicing and cleaning the multimeter.
Guidance on identifying and resolving common multimeter problems.
Explains icons found on the digital multimeter device.
Details the multimeter's technical specifications and operating parameters.
Essential general safety precautions for using the multimeter.
Outlines specific safety rules for operating the multimeter.
Instructions and precautions before initial use of the multimeter.
Details the multimeter's display, function switch, and connection ports.
Procedures for measuring DC and AC voltages.
Procedures for measuring DC and AC currents.
Instructions for measuring electrical resistance.
Steps for measuring the conducting-state voltage drop of diodes.
Guide to measuring the hFE value of transistors.
Detailed steps for measuring alternating current using the multimeter.
Safety instructions and procedures for servicing and cleaning the multimeter.
Guidance on identifying and resolving common multimeter problems.
| Diode Test | Yes |
|---|---|
| Continuity Test | Yes |
| Display | LCD |
| DC Current Range | 10A |
| Measurement Functions | Voltage, Current, Resistance, Diode, Continuity |
| Safety Rating | 600V |
| Power Supply | 9V battery |
Loading...