Defy DDW177 User Manual

8
EN
Connecton to the dran
Water dscharge hose can drectly
be connected to the dran hole or
snk’s dranage. The length of ths
connecton must be mn. 50 cm and
max. 100 cm from the oor.
A dscharge hose longer than 4
meters causes drty washng.
Attach the water dscharge hose to
the dranppe wthout bendng t.
Tghtly fx the water dscharge hose
to the dranppe n order to prevent
any dslocaton of the water dscharge
hose durng operaton of the product.
C Dranppe must be connected to
the sewage system and t should
not be connected to any surface
water.
sludge accumulation at the end of
washing.
Permtted water temperature: up
to 25°C
The dshwasher may not be
connected to open warm water
devces or ow-through water
heaters.
• Do not use old or used water nlet
hose on the new product. Use the
new water nlet hose suppled
wth the product.
• Connect the water nlet hose
drectly to the water tap.
Pressure comng from the tap
should be mnmum 0.3 and
maxmum 10 bars. If the water
pressure exceeds 10 bars, a
pressure relef valve should be
nstalled n between.
C Use a screw-on hose connector to
connect the water nlet hose to a
water tap wth a ¾ nch external
thread. If requred, use a flter
nsert to flter deposts from the
ppes.
• Open the taps completely after
makng the connectons to check
for water leaks.
A For your safety, close the water
nlet tap completely after the
washng programme s over.

Defy DDW177 Specifications

General

Brand	Defy
Model	DDW177
Category	Dishwasher
Language	English