10
Dryer / User Manual
3.3 Adjusting feet
In order to ensure that your product operates
more silently and vibration-free, it must stand
level and balanced on its feet. Front feet of your
product can be adjusted. Balance the machine
by adjusting the feet.
1. Loosen the feet by hand.
2. Adjust the feet until the product stands level
and firmly on the floor.
C
NOTE
• Do not use any tools to loosen the
adjustable feet, otherwise, they can be
damaged.
• Never remove the adjustable feet from
their housings.
• You may supply 2 plastic pieces from
an Authorized Service with 2951620100
part number. These parts prevent
your machine from slipping when the
machine locates on wet and slippery
surfaces. You may assemble mentioned
parts to the front adjustable feet by
fitting and pressing them to snap into
ground of feet.
3.4 Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and
chimney connections.
3. Drain water remained in the machine
completely before transportation.
To Next Page
Loading...
Need help?
General
