Page 10
Warning: Damaged power
cables must be replaced by an
authorised service agent.
Connect the machine to a grounded outlet
protected by a 6 A fuse. Our company shall
not be liable for any damages that will arise
when the machine is used without grounding
in accordance with the local regulations.
Connection must comply with national
regulations.
Power cable plug must be within easy
reach after installation.
If the current value of the fuse or breaker
in the house is less than 6 Amps, have a
qualified electrician install a 6 Amp fuse.
The voltage specified in the "Technical
specifications" section must be equal to
your mains voltage.
Do not make connections via extension
cables or multi-plugs.
Electrical connection
Ensure that the machine is level. Check
the leveller on the machine. (Depends on
model). A machine that is not levelled and is
unstable will vibrate and generate excessive
noise.
Optional feet assembly process:
1. Remove the two front adjsting feet and
two rear feet rubbers.
2. Fit the four optional feet and fix with
screws as per the following diagram.
Warning: Packaging materials are
Dangerous to children. Keep
packaging materials in a safe place
away from the reach of children.
1. Unplug the machine before transporting it.
2. Remove the water drain and water supply
connections.
3. Drain all the water that has remained in
the machine.
4. Fit the polystyrene and then package the
machine.
Transportation of the machine
Using detergent /softener and bleach
When using detergent, softener,
starch, fabric dye, bleach or
limescale remover please ensure
you read the detergent
manufacturer's instructions on the
package carefully and follow the
suggested dosage values. Use
measuring cup if available.
To Next Page
Loading...
Need help?
General
