Page 5
Features
Quick Wash button
Selecting this feature will shorten the wash time for lightly soiled fabrics. Quick wash
may be used for cotton and synthetic programmes at temperatures below 60°C.
Rinse Plus
Selecting this feature will adds an extra rinse to the was cycle. This is particularly use-
ful for removing any residual detergent from absorbent fabrics.
Anti Creasing
Fewer articles of clothing should be loaded when selecting this function. Which en-
ables special wash and spinning profiles to minimise creasing and wrinkles. This sig-
nificantly reduces the amount of ironing required afterwards.
Spin speed selection
The desired spin speed may be selected up to a maximum of 1200 rpm. If you do not
require any spinning, select the NO SPIN option.
Rinse and Hold
Selecting this feature will stop the machine during the final rinse cycle with water in
the tub. This prevents drip-dry, permanent press and wool articles from creasing
caused by waiting in a ‘dry’ machine before being removed. To complete the pro-
gramme, press the START / PAUSE / CANCEL button, select the desired spin speed
and press the START / PAUSE / CANCEL button once more.
Detergent dispenser
The detergent dispenser has 3 compartments.( see page 4).
Use only low foam detergents specifically designed for front loading automatic wash-
ing machines. Dose as per the manufacturer’s recommendations on the detergent pack.
Dosage may vary according to wash load, dirt and water hardness.
Wash programme selector.
Turn the knob to select the desired programme.
Door
Open the door by pushing the
DOOR OPEN button.
Close the door by pushing firmly until it clicks
into place.
Note:
The door locks during the wash cycle.
Switch the machine off and allow 1 to 2 minutes for the safety lock to disengage.
Thereafter the door may be opened.
To Next Page
Loading...
Need help?
General