15
©
1999 Directed Electronics, Inc.
Command
Initiates the panic sequence. The panic sequence consists of 30
seconds of parking light flashes and horn honks.
Command
Anti-carjacking sequence. This feature can be used to protect
against carjacking by activating the starter kill so that the vehicle
cannot be started. It also causes the parking lights to flash and
the siren to sound until Command is received.
Command
This command disables the starter kill so that the vehicle can be
started.
Command
This command controls Channel Two, which can be assigned to
control an optional vehicle power accessory, such as trunk release
or a remote starter.
Channel Two is used for _______________________________.
Command
This command controls Channel Three, which can be assigned to
control another optional vehicle power accessory.
Channel Three is used for _______________________________.
Command
This command controls Channel Four, which can be assigned to
control another optional vehicle power accessory.
Channel Four is used for _______________________________.
To Next Page
Loading...
Need help?
General