Need help?Do you have a question about the DeKo DKCD20XL01 and is the answer not in the manual?
Ensure a clean, well-lit workspace. Avoid explosive atmospheres and keep children away to prevent accidents.
Use correct plugs, avoid grounded surfaces, protect from water, and use outdoor extension cords to prevent shock.
Stay alert, wear PPE, prevent unintended startup, and remove adjustment tools before operating for personal protection.
Use the correct tool, do not force it, disconnect power before adjustments, and maintain tools for safe operation.
Use specified chargers and battery packs only. Keep away from metal objects and avoid damage to prevent hazards.
Wear ear protection and goggles during impact drilling. Manage dust hazards and ensure ventilation.
Set direction switch to center, hold by insulated grips, secure workpiece, and avoid exceeding speed ratings.
For driving screws, loosening screws, and drilling in wood, metal, ceramics, and plastic materials.
Squeeze to turn on/off; continuous use in variable speed range is not recommended to avoid switch damage.
Determines tool rotation direction and functions as a lock-off button for safe operation.
Adjust torque using the ring and select speed with the 2-speed gear switch for optimal performance.
Use keyless chuck for accessory changes; LED worklight illuminates immediate work area.
Install by sliding into handle until seated; remove by pressing the release button.
Select speed/torque, adjust ring, insert fastener, practice runs, and start with low torque settings.
Select speed/torque, use proper bits, apply inline pressure, hold firmly, and avoid stalling to prevent injury.
General| Brand | DeKo |
|---|---|
| Model | DKCD20XL01 |
| Category | Power Screwdriver |
| Language | English |
To Next Page
