To Next PageTo Next Page
Need help?Do you have a question about the Del Morino TS52E and is the answer not in the manual?
General| Category | Rotary Tiller |
|---|---|
| Hitch Type | 3-point hitch |
| Rotor Speed | 540 rpm |
| Gearbox | Oil Bath |
| Working Width | 52 inches (132 cm) |
| Weight | 441 lbs (200 kg) |
Explains the meaning of Danger, Warning, Caution, Important, and Note signals.
Explains the various functions the machine can perform using different tools.
Describes how the machine connects to the tractor and its operational adjustments.
Details speed limits and power limits to prevent damage.
Lists the standard components included with the machine.
Lists available tools and optional configurations for the machine.
General guidelines for safe operation, including working conditions and checks.
Specifies who is permitted to use the machine and potential regulatory restrictions.
Instructions for the initial operation and break-in period of the machine.
Information on replacing and maintaining safety labels on the machine.
Steps to hook up and connect the machine to the tractor before starting.
Procedures for starting the machine and beginning the cutting operation.
Steps to safely stop and disconnect the machine after use.
Outlines the maintenance tasks and their frequency based on operating hours.
Details the procedure and type of grease for lubrication points.
Instructions for checking and replacing oil in the aluminum gear box.
Instructions for checking and replacing oil in the iron casting gear box.
Procedure for changing the cutting tools on the machine.
Instructions for adjusting and replacing the transmission belts.
Steps for assembling and installing the quick hitch kit.
Instructions for installing the rear roller extension.
