17
Installation
WI-KEY INSTALLING THE CONTROL BOX
- It must be located in a place from which it is possible to check
that no one enters the pool during the manoeuvre.
- It is mandatory to install the locking «strip».
- Before fixing the control box, check that the emitter is
communicating with the receiver.
The support must be attached to a fixed support
Closing
Opening
Stops the current action
Keyboard lock
red / green flashing = emitter locked
Emitter unlocking procedure see «page 30»
The emitter must be located outside volume 0.
The distance between the emitter and the receiver must not exceed:
- 50 m in an obstacle-free zone.
- 25 m behind a basic wall.
- 15 m behind several walls or an especially thick wall.
we recommend checking emitter/receiver communication before fi xing permanently.
To Next Page
Loading...