Delavan 4400 Series - User Manual

4-, 5-, 6-, 7-,
8-Roller Pump
Instruction
Manual
01509-MN
GENERAL
Delavan roller pumps are available with a variety of options, such as a choice of roller numbers (4-roller, 5-roller, 6-roller, 7-roller,
8-roller), seal materials (Viton-A or Teflon), and a direction of rotation. Also, Ni-Resist and Diamond Cast pump bodies are available on
all Delavan roller pumps. Stainless steel shaft is standard on all models.
(Read carefully before installation and operation)
FEATURES:
•
Max. flow: 9.2 gpm at 2600 rpm
•
Max. fluid temperature: 140ºF/60ºC
•
Port size: 3/4” NPT
•
Shaft size: 5/8” Solid or 1/2” Hollow
•
Cast iron, Ni-Resist or Diamond Series housing
•
Pump shaft rotation: CW Standard/CCW Optional
•
Weight: 5 lbs.
•
Rollers: Ultra Rollers standard
•
Shaft Seals: Viton standard
•
Available PTO adapters
FEATURES:
•
Max. flow: 19.6 gpm at 1000 rpm
•
Max. fluid temperature: 140ºF/60ºC
•
Port size: 3/4” NPT
•
Shaft size: 5/8” Solid
•
Cast iron, Ni-Resist or Diamond Series housing
•
Pump shaft rotation: CCW (CW available)
•
Weight: 9 lbs.
•
Rollers: Ultra Rollers standard
•
Shaft Seals: Viton standard
•
Available PTO adapters
FEATURES:
•
Max. flow: 46.5 gpm at 1000 rpm
•
Max. fluid temperature: 140ºF/60ºC
•
Port size: 1” NPT
•
Shaft size: 15/16” Solid Shaft
•
Cast iron, Ni-Resist or Diamond Series housing
•
Pump shaft rotation: CCW (CW available)
•
Weight: 19 lbs.
•
Rollers: Ultra Rollers standard
•
Shaft Seals: Viton standard
•
Available PTO adapters
FEATURES:
•
Max. flow: 19.6 gpm at 1000 rpm
•
Max. fluid temperature: 140ºF/60ºC
•
Port size: 3/4” NPT
•
Shaft size: 5/8” Solid
•
Cast iron, Ni-Resist or Diamond Series housing
•
Pump shaft rotation: CCW (CW available)
•
Weight: 9 lbs.
•
Rollers: Ultra Rollers standard
•
Shaft Seals: Viton standard
•
Available PTO adapters
•
Rear Ports
4-ROLLER SIDE PORT PUMP 5-ROLLER SIDE PORT PUMP
6-ROLLER SIDE PORT PUMP 6-ROLLER BACK PORT PUMP
7-ROLLER SIDE PORT PUMP
8-ROLLER SIDE PORT PUMP
FEATURES:
•
Max. flow: 22.5 gpm at 850 rpm max.
•
Max. fluid temperature: 140ºF/60ºC
•
Port size: 3/4” NPT
•
Shaft size: 15/16” Solid
•
Cast iron, Ni-Resist or Diamond Series housing
•
Pump shaft rotation: CCW (CW available)
•
Weight: 14 lbs.
•
Rollers: Ultra Rollers standard
•
Shaft Seals: Viton standard
•
Available PTO adapters
FEATURES:
•
Max. flow: 24 gpm at 1000 rpm
•
Max. fluid temperature: 140ºF/60ºC
•
Port size: 3/4” NPT
•
Shaft size: 15/16” Solid
•
Cast iron, Ni-Resist or Diamond Series housing
•
Pump shaft rotation: CCW (CW available)
•
Weight: 14 lbs.
•
Rollers: Ultra Rollers standard
•
Shaft Seals: Viton seals standard
•
Available PTO adapters
Series 4400 Series 5500
Series 6600 Series 6601
Series 7000
Series 8800

Summary

General Information and Pump Overview

General Pump Description

Details the availability of Delavan roller pumps with various options and standard features.

Pump Model Specifications

4-Roller Side Port Pump Features

Lists features for the 4-Roller Side Port Pump Series 4400, including max flow, port size, and weight.

5-Roller Side Port Pump Features

Lists features for the 5-Roller Side Port Pump Series 5500, including max flow, port size, and weight.

6-Roller Side Port Pump Features

Lists features for the 6-Roller Side Port Pump Series 6600, including max flow, port size, and weight.

6-Roller Back Port Pump Features

Lists features for the 6-Roller Back Port Pump Series 6601, including max flow, port size, and weight.

7-Roller Side Port Pump Features

Lists features for the 7-Roller Side Port Pump Series 7000, including max flow, port size, and weight.

8-Roller Side Port Pump Features

Lists features for the 8-Roller Side Port Pump Series 8800, including max flow, port size, and weight.

Technical Data and Drawings

4-Roller Pump Drawings and Specs

Provides dimensional drawings and flow rate/horsepower requirements for the 4-Roller pump.

5-Roller Pump Drawings and Specs

Provides dimensional drawings and flow rate/horsepower requirements for the 5-Roller pump.

6-Roller Pump Drawings and Specs

Provides dimensional drawings and flow rate data for 6-Roller pumps (Side and Back Port).

7 & 8-Roller Pump Drawings and Specs

Provides dimensional drawings and flow rate data for 7-Roller and 8-Roller pumps.

Installation and Operation Procedures

Tractor PTO Installation

Step-by-step guide for securely installing the pump onto a tractor PTO shaft.

Engine Installation

Guidelines for mounting and aligning the pump with an engine for direct or pulley drive.

Pump Operation Guidelines

Instructions on proper pump operation, including priming and avoiding dry running.

Maintenance, Disassembly, and Assembly

Pump Maintenance Procedures

Covers lubrication, cleaning after use, and storage recommendations for the pump.

Pump Disassembly Steps

Detailed instructions on how to safely disassemble the pump for inspection or repair.

Pump Assembly Steps

Guide on reassembling the pump after maintenance or repair, including part placement.

Troubleshooting and Repair Kits

Troubleshooting Common Pump Issues

Identifies common pump problems and provides solutions for pressure, noise, and rotation issues.

Universal Repair Kits Overview

Lists universal repair kits available for various Delavan pump models and their contents.

Pump Couplers

Roller Pump Coupler Types

Details different roller pump couplers, their part numbers, fits pumps, shaft sizes, and descriptions.

Product Warranty and Returns

Delavan Product Warranty Policy

Outlines the warranty coverage for Delavan products against manufacturing defects.

Return Procedures and Important Notes

Instructions for returning pumps for warranty or repair, including crucial preparation steps.

Delavan 4400 Series Specifications

General

Brand	Delavan
Model	4400 Series
Category	Water Pump
Language	English